Assembly Instructions

ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the carton and then lay out
all the parts on the flat surface.
2. Screw Tube(B) ,(C),(D),and Socket Section (E)
into Base(A) respectively.
3. Insert Harp(F) into the saddle of Socket Section(E) .
4. Put Shade on Harp(F),make the shade keep horizontal
before tightening it by Finial(G).
Your lamp now is ready to enjoy
IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER)
AS A SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT
IN A POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET,
REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN.
NEVER USE WITH AN EXTENSION CORD UNLESS THE PLUG CAN BE FULLY AND EASILY
INSERTED. DO NOT ATTEMPT TO ALTER THE PLUG.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Use 3-Way 150 Wattage (Maximum)
Type A bulb (Bulb not included)