Assembly Instruction

C
Hanger Nail
Mirror Hanger
Adjustment
Screw
Bracket Catch
Mark "B"
Crossbar
3”
Figure 5
STEP 5 - Locate Mirror Hangers and Mirror
A. Locate Mirror Hangers (A) and align the top center with
3” Locator mark. Secure them to wall surface with
Hanger Nails (B).
B. With Mirror Hangers properly installed, be sure that the
(2) Bracket Catches are approximately equal in length
from the top of Mirror Hangers (A). Adjust overall length
with Adjustment Screws.
C. With the help of another person, pass the Hanging
Holes on the Crossbars over the Mirror Hangers so that
the Crossbars rest on the inside of the Bracket Catches.
Clean glass with household glass cleaner. Retain this
sheet for future reference.
Please be noted that the Mirror
Hangers are fully adjustable allowing for easy
leveling.
Hanging Hole
Assembly Instruction
5of5