Assembly Instruction

ManualsBrandsRed Barrel Studio ManualsAccent MirrorsTy Wall Mirror

Part

Description

Quantity

Package Contents

Warnings and Cautions

These instructions are provided for your safety. It is very important you read them completely before installing

the mirror. We strongly recommend that a licensed, professional electrician perform the installation.

ToolsRequired:Flathead screwdriver,Phillips screwdriver,pliers, gloves,safety

glasses.

EstimatedAssemblyTime:20-30 minutes

BulbRecommended: None.

Preparation:Identify andinspect allparts beforebeginning installation.Check package

contentlist anddiagrams belowto besure allparts arepresent. Ifany partsare missing

ordamaged, donot attemptto assemble,install, oroperate themirror. Contactcustomer

servicefor replacementparts.

Mirror Hanger

2pcs

4pcs

Hanger Nail

1pc

Lock Screw

Mirror with Backing

Mirror Frame

Assembly Instruction

1of5

Summary of content (5 pages)

PAGE 1
Assembly Instruction Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, gloves, safety glasses. Bulb Recommended: None. Estimated Assembly Time: 20-30 minutes Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the mirror. Contact customer service for replacement parts.
PAGE 2
FINISH: PALLADIAN BRONZE 21” 35” NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2" NO. PART NUMBER REPLACEMENT PART DESCRIPTION 1 2of5 REQ.
PAGE 3
Assembly Instruction STEP 1 - Attach Mirror with Backing to Mirror Frame A. Place the Mirror Frame (E) onto a flat working surface with backing facing you. B. Place the Mirror with Backing (D) onto the back of the Mirror Frame (E). Align the Holes on Crossbars and Mounting Holes on the Mirror Frame (E). Thread Lock Screws (C) into Mounting Holes on the Mirror Frame (E) to secure them together. Hand tighten until snug.
PAGE 4
Assembly Instruction A. Locate Mirror Hangers (A) and align the top center with 3” Locator mark. Secure them to wall surface with Hanger Nails (B). Please be noted that the Mirror Hangers are fully adjustable allowing for easy leveling. B. With Mirror Hangers properly installed, be sure that the (2) Bracket Catches are approximately equal in length from the top of Mirror Hangers (A). Adjust overall length with Adjustment Screws. C.
PAGE 5
Assembly Instruction A. Locate Mirror Hangers (A) and align the top center with 3” Locator mark. Secure them to wall surface with Hanger Nails (B). Please be noted that the Mirror Hangers are fully adjustable allowing for easy leveling. B. With Mirror Hangers properly installed, be sure that the (2) Bracket Catches are approximately equal in length from the top of Mirror Hangers (A). Adjust overall length with Adjustment Screws. C.