Installation Instructions

2
1A
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Neatly place the wires into the junction box, mount the fixture base onto the mounting plate studs, and secure it with the
two cap nuts.
Screw the lamp into socket. Refer to the label on the socket for Max Wattage Information.
Install the shade to the fixture using the shade cap nuts.
Caulk around the base of the fixture with waterproof construction sealant.
1
2
3
4
5
Install the Fixture
6
FIXTURE BASE
6
LAMP
7
8
8
5
FIXTURE
SHADE CAP NUT
7
1
1
3
4
JUNCTION BOX
NEUTRAL WIRE
HOT WIRE
WHITE WIRE
BLACK WIRE
MOUNTING
PLATE STUD
MOUNTING
PLATE
SHADE
CAP NUT
7