Installation & Assembly
1A
Install the Fixture
2
If necessary, screw the shorter end of the threaded nipple tightly onto the mounting plate and the screw collar onto the
threaded nipple.
Secure the mounting plate to the electrical box with two mounting plate screws.
Determine the wanted height of the fixture and remove a portion of the chain by opening a link with pliers.
Screw the long threaded rod onto the fixture, then place the following parts on the threaded rod in this order: rod cover,
spacer, washer, lower canopy, washer, and tighten them all down with the nut. Finally screw the fixture loop on tightly.
Open the chain link with pliers and install the chain on the fixture loop, then re-close the chain link.
Unscrew the collar nut from the screw collar, install the collar nut and the canopy onto the chain (in that order).
Open a link on the other end of the chain with pliers and install the chain onto the screw collar to secure the fixture, re-close
the link.
Weave the cord through the chain, canopy, collar nut, screw collar, threaded nipple, and out of the electrical box. Trim the
cord leaving enough to make electrical connections.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the electrical box, place the canopy onto the ceiling, and secure it in place by screwing the
collar nut tightly onto the screw collar.
Place the shade onto the shade base and secure them in place by installing and tightly screwing the shade collar nut onto
the socket; repeat for all shades.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
1
2
3
4
5
6
7
8
9
10
11
12
13
ELECTRICAL BOX
MOUNTING PLATE SCREW
SCREW COLLAR
MOUNTING PLATE
THREADED NIPPLE
CANOPY
CHAIN
COLLAR NUT
FIXTURE LOOP
LOWER CANOPY
ROD COVER
LONG THREADED ROD
LAMP
SHADE
SHADE BASE
SOCKET
SHADE COLLAR NUT
NUT
WASHER
WASHER
SPACER
1
2
5
5
4
4
4
4
13
12




