Installation & Assembly

2
1A
Secure the mounting plate to the electrical box with two mounting plate screws.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Align the key slots on the fixture base to the mounting plate screws, place the fixture base onto the mounting plate, and
secure it by rotating it to the narrow portion of the keyed slot.
Screw the threaded nipple to the bottom of the fixture base.
Screw the lamp(s) into the socket(s). Refer to the label on the socket for Max Wattage Information.
Slip the shade through the threaded nipple and secure it in place by fastening it with the flat washer and hex nut.
Install the decorative cup to the bottom of the shade and secure it by tightening the finial.
1
2
3
4
5
6
7
LAMP
SHADE
SOCKET
Install the Fixture
FIXTURE BASE
8
WASHER
6
5
HEX NUT
DECORATIVE CUP
FINIAL
THREADED NIPPLE
1
34
8
9
7
8
9
ELECTRICAL BOX
NEUTRAL WIRE
WHITE WIRE
HOT WIRE
BLACK WIRE
MOUNTING PLATE SCREW
MOUNTING PLATE
2