ASSEMBLY INSTRUCTIONS BREAKFAST TABLE ASSEMBLE ON A FLAT, PROTECTED SURFACE PART LIST GRUE QUANTITY DESCRIPTION 5 1PC TABLE TOP 1 B L FRONT LEG = 1PC BACK LEG 0 1PC CROSS BAR 1pC ; 7 LEFT SIDE FRAME E 1 pPC MIDDLE FRAME G 1PC DRAWER H 2 PCS SHELF * 8 PCS + 1PC BOLT J &S 8 PCS + 1PC SPRING WASHER K 8 PCS + 1PC FLAT WASHER 100 ALLEN WRENCH M doomster PCS + 1PC SCREW MADE IN VIETNAM
STEP 1 A. PLACE TOP (A) UPSIDE DOWN ON A FLAT, PROTECTED SURFACE. = B. ATTACH FRONT LEG (B) AND BACK LEG (D) TO TABLE TOP (A) AND CROSS BAR (D) AS SHOWN. C. USE ALLEN WRENCH (L) TO TIGHTEN BOLTS (I), SPRING WASHERS (J) AND FLASH WASHERS (K) AS SHOWN. soa o L STEP 2 A ATTACH MIDDLE FRAME (F) TO TOP (A) WITH BOLTS (1), SPRING WASHERS (J) AND FLAT WASHERS (K) USING ALLEN WRENCH (L).
STEP 3 A. ATTACHED SELVES (H) AND DRAWER (G) TO THE ASSEMBLED UNIT. . STEP 4 A. ATTACH LEFT SIDE FRAME (E) TO THE ASSEMBLED UNIT BY USING BOLTS (1), SPRING WASHERS (J) AND FLAT WASHERS (K).
STEP USE SCREW DRIVER ( NOT PROVIDED) TO TIGHTEN SCREWS ( M) AS SHOWN. STEP 6 A. ROTATE THE ASSEMBLED UNIT TO UPRIGHT POSITION. B. TABLE IS READY FOR USE. IMPORTANT NOTE: m PLACE ALL WOODEN PARTS ON A CLEAN AND SMOOTH SURFACE SUCH AS A RUG OR CARPET TO AVOID SCRATCHING THE PARTS “ “* KINDLY FOLLOW THE ASSEMBLY INSTRUCTION STEP BY STEP. RECOMMEND THAT YOU SAVE THE ALLEN WRENCH (PART A) AND PERIODICALLY TIGHTEN ALL BOLTS/SCREWS.
