Installation & Assembly

3. From underneath the seat frame (#1) apply a flat washer (#C) onto the other end of the
threaded studs (#A), then apply a hex nut (#D). Secure the nut using the wrench (#B).
1. Insert 4 threaded studs
(#A) into the backrest
(#3). Turn right to tighten.
2. Place the backrest (#3)
onto the seat frame (#1).
1. Insert 4 threaded studs (#A) into each
arm (#4). Turn right to tighten.
2. Place the arms (#4)
onto the sides of
the seat frame (#1).
3. From within the seat frame (#1) apply a flat washer (#C) onto the other end of the
threaded studs (#A), then apply a hex nut (#D). Secure the nut using the wrench (#B).