Installation & Assembly

E (Socket Ring)
D (Shade)
C (Spiral Tube)
B (Pole)
A (Base)
ASSEMBLY INSTRUCTIONS:
※ VERY IMPORTANT
PLEASE READ THOROUGHLY. MAKE SURE YOU PROPERLY ALIGN THE POLES BEFORE
SCREWING THEM TOGETHER TO AVOID DAMAGING CONNECTION THREADS. NOT
ADHERING TO THIS PROCEDURE MAY VOID YOUR WARRANTY!
1. Carefully unpack and place all lamp parts on a flat surface.
2. Screw the Pole (B) into the Base (A).
3. Screw the Spiral Tube (C) onto the Pole (B).
4. Put the Glass Shade (D) onto the socket, secure with Socket Ring (E) by turning clockwise until tight.
5. Install the bulb into the socket then insert the polarized plug into a wall outlet and enjoy.
6. Use only a soft dry cloth to clean. Never use chemical or abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the
risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully and easily inserted. Do not alter the plug.
ATTENTION
POUR PRÉVENIR LES CHOCS ÉLECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT,
SAUF SI LES LAMES PEUVENT ÊTRE INSÉRÉES A FOND SANS EN LAISSER AUCUNE PARTIE
À DÉCOUVERT.
※ PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.
※ SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Use 1pc 150W (Maximum) incandescent A Type bulb.