DRESSER ASSEMBLY INSTRUCTIONS PAGE 1 OF 3
ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size 2. Please check to see that all hardware and parts are present prior start of assembly. 3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly. Warning! 1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2.
ANTI-TIPPING KIT PARTS IDENTIFICATION A DRESSER HARDWARE IDENTIFICATION 1SET This tip restraint must be attached to a wall stud using long screw enclosed. STEP 1 Attach a bracket securely to the back top rail of the dresser using short screw provided, through the smaller hole. 1 SHORT SCREW 1PC 2 LONG SCREW 1PC 3 CABLE TIE 1PC 4 L BRACKET 2PCS STEP 2 Locate the other bracket on the wall over a wall stud and two inches below the mounting bracket secured to the back of dresser.
