Assembly & Installation Instructions

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Outlet Box
House Grounding Wire
Wire Nut(D)
Fixture Wire
Fixture Grounding Wire
Mounting Strap(A)
Green Grounding Screw(C)
Mounting Screw(B)
Threaded Pipe(G)
Canopy(I)
Top Loop(H)
Hex Nut(E)
Washer(F)
Collar(J)
Loop Lock(K)
Loop Lock(K)
Chain(L)
Loop
Rubber Pad
Stem
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Nut (D)
Canopy (I)
Loop Lock (K)
Chain (L)
Hex Nut (E)
Washer (F)
Threaded Pipe(G)
Top Loop (H)
Collar (J)
Turn off the power at fuse or circuit box
Installation Steps
1. Attach threaded pipe to the mounting strap, and then secure
it with a washer and a hex nut.
2. Attach mounting strap to the outlet box using two mounting
screws.
3. Take a glass panel, insert it into the slot at one side of the
metal frame carefully, secure it by pressing the clips. Repeat
with the other glass panels.(See Fig.1)
4. Slip the rubber pad down through the stem, and then secure
the loop onto the stem.
5. Secure the top loop to the threaded pipe.
Clip
Glass Panel
Metal Frame
Clip
Glass Panel
Fig.1
Slot
Bulb Type A Max.100W
(not included)
Socket