Assembly Instructions

Step 3

Step 4

Cover the bottom of the Seat Frame (A) with the non-woven fabric.

Smooth down the Magic Tape on all four sides of the Seat by hand.

Install the Legs(D) into the bottom of the Seat Frame (A) by placing a Washer

Rings(①) onto the threaded stem of the Legs.

And then insert the threaded stem into the threaded mounting position at each

Corner of the Bottom Seat Frame (A)).

Tighten by turning the Legs clockwise.

Note: The use of Washer Rings(①) are OPTIONAL and are especially useful to

help alleviate slight wobbles.

Some Legs may need more than one Washer Ring whilst some Legs may not

need any.

Position Sofa right side up and test for stability on a Level Surface.

Add or remove Washer Rings(①) where needed to achieve stability.

4 of 7