Installation & Assembly
Prepare 4 bolts assembly by inserting lock washer (#E), then flat washer (#F) onto bolts (#D). Align seat (#2) to the
holes of the chair back (#1). Secure middle two holes of the seat (#2) by using bolts (#D). Do not full tighten bolts (#D).
Prepare 4 bolts assembly by inserting lock washer (#E),
then flat washer (#F) onto bolts (#B). Secure corner holes
of the seat (#2) to chair back (#1) by using bolts (#B).
Tighten all bolts (#B,D).








