Installation & Assembly

Step 2
Step 3
Place the Backrest(D) against the Left Armrest/Leg(A) and the Seat(C).
Attach the Backrest(D) to the Left Armrest/Leg(A) and Seat(C) using Bolts(①) and
Washers(②) with Allen Key(④) as shown in Picture.
Do not fully tighten the Bolts.
Occasionally some of the PE Wicker shifts and covers the mounting positions
preventing easy assembly. The PE Wicker should never be cut, but moved away
from the mounting positions.
Place the Right Armrest/Leg(B) against the Backrest(D) and Seat(C).
Attach the Right Armrest/Leg(B) to Backrest(D) and Seat(C) using Bolts(①) and
Washers(②) with Allen Key(④) as shown in Picture.
Do not fully tighten the Bolts.
When tightening these Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one.This may cause
the frame to warp. If there are still wobbles, loosen the Bolts and execute this
same drop test.If the Chair is not stable it could lead to damage to the product.
Page 4 OF 6