Assembly Instructions

Step 1

I. Place the back rest with legs (#1) on a protected surface.

II. Align the seat cushion frame (#2) with the pre-drilled holes of the

back rest with legs (#1).

III. Prepare 3 bolt assemblies by inserting FIRST the lock washer (#B)

onto the bolt (#C) and then the flat washer (#A) onto the SAME bolt

(#C), in that order.

IV. Insert the bolt assembly through the center hole of the seat cushion

frame (#2) and secure that bolt using the Allen wrench (#F) to lock it

in with the back rest with legs (#1). Repeat for the other two holes.

Step 2

Turn right (clockwise) to tighten

Page 4 of 5

#A x 3 pcs

#B x 3 pcs

#C x 3 pcs

#A x 4 pcs

#B x 4 pcs

#E x 4 pcs

I. Prepare 4 bolt assemblies by inserting FIRST the lock washer (#B)

onto the bolt (#E) and then the flat washer (#A) onto the SAME bolt

(#E), in that order.

II. Insert 2 bolt assemblies through the two pre-drilled center holes in

the corner of the seat cushion frame (#2) and secure those bolts

using the Allen wrench (#F) to lock it in with the back rest with legs

(#1). Repeat for the other side.

Enlarged