Installation & Assembly

coupler
nut(A)
m:::.--~-Tglass shade
· nipple
· tube
_ pad(A)
m1JgH:iad
cover
finial ·
ground screw
- - ~
bati nut --=- · _,
~.::t:~~- white w i re
~1-=--- ground wire
............. .._..•--- outlet box scre w
mount i ng scr ew
1 . Thread 2 mounting screws properly into the ·
2 relevant mounting h oles pre-drilled on the
crossbar.
2. Attach the cross bar· to outlet box using 2· outlet
box screws upwflrds.
3. Weave fixture wir e s and groundwire t h rough
the every tube(A), swi v el and canopy.
4 . Make wire connections:
- -Attach ground w ire to house ground wire
using a wire nutor attach them to the
cross bar with a green ground Scr ew ,
--Attaclt white wire from light to white wire
from power source with a wire nut.
-Attach black wire from light to bla c k wire
from power sou r ce with a wire nut.
Observing : positive wirewith positive wire,
negative wire with negative wire, ground · wire
with ground · wire .
5 . . Tuck the wire connections neatly into the outlet box.
6 • . Attach the canopy tothe ceiling and letthe 2 pad(B) --=::,.....,,..._~s--....,,
mounting screws protrude through the 2
pre-drilled holes on the canopy and secure
it with ball nuts • .
9~ Thread the mpple onto the coupler and thread
the nut(~) ontothe nipple. Let the tube, the
pad (A) . & pad(B) pass through the nipple, ·
and thread the nut(B) onto , the nipple. Put
the glass shade, plastic pad, metal pad onto the
nipple in turn, then thread the nut(C) onto the
nipple. Finally put the cover onto the nipple, ,. .
and secure it with finial.
10. Install bulb.(n _ otincluded) (Please do not exceed
the maximum capacity which is recommended on
the flxture.) . ·
11. Tum onthe power at - fuse · or circuit box.
NOTE : Before installing, consult l ocal elect r ical codes for wiring and gro unding requ i r e ment.
· r TO A VOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
WARNING: . . · ·
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE . ·
ASSEMB'-'Y · AND . INSTALLATION · 1NSTRUCTlONS .