Installation & Assembly

Install the Fixture

If necessary, screw the shorter end of the threaded nipple tightly onto the mounting plate and the screw collar onto the threaded

nipple.

Secure the mounting plate to the junction box.

Screw the fixture loop onto the stem.

Feed the cord through the stem and fixture loop, then screw the stem to the fixture.

Determine the wanted height of the fixture and remove a portion of the chain by opening a link with pliers.

Open the chain link with pliers and install the chain on the fixture loop, then re-close the chain link.

Unscrew the collar nut from the screw collar, install the collar nut and the canopy onto the chain (in that order).

Open a link on the other end of the chain with pliers and install the chain onto the screw collar to secure the fixture, re-close the link

with pliers.

Weave the cord through the chain, canopy, collar nut, screw collar, threaded nipple, and out of the junction box. Trim the cord leaving

enough to make electrical connections.

Connect the fixture to a suitable ground in accordance to local electrical codes.

Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.

Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.

Neatly place all the wires into the junction box, place the canopy onto the ceiling, and secure it in place by screwing the collar nut

tightly onto the screw collar.

Place the shade onto the shade base and secure them it place by installing and tightly screwing the shade collar nut onto the socket

using the shade tool. Repeat for all shades.

Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.

SHADE

SHADE COLLAR NUT

LAMP

CANOPY

STEM

SHADE BASE

SOCKET

SHADE TOOL

JUNCTION BOX

MOUNTING PLATE

THREADED NIPPLE

SCREW COLLAR

COLLAR NUT

CHAIN