Assembly Instructions

Attach Leg Frame to the Table Top(A) using Bolts(
①
) with Allen Key(
⑤
).
Do not fully tighten the Bolts.
Step 5
Stand the Table up, with assistance from your partner.
EXERT pressure, floorwards, onto the Table.
This pressure will help the Legs and Table Top reach alignment at all joints.
Check for wobbles on a level surface.
If no wobbles are found, a sequential manner, gradually tighten all Bolts and Screws until
evenly secured.
When tightening the Bolts and Screws tighten sequentially.
Do not tighten any Bolt or Screw fully and then move on towards the next one. This
could cause the frame to warp.
If there are still wobbles, loosen the Bolts and Screws and excute the same process.
If the Table is not Stable it could lead to damage to the product.
Step 4
5
1
A
Page 6 of 8