Installation & Assembly

Do not overtighten cam bolts. Stop when they feel secure.
Figure 1
Note: Align cam bolts by hand before
using screwdriver.
Insert Cam Locks (C) into
corresponding holes on Front Upper
Bar (7).
Insert Cam Bolts (A) into
corresponding holes on Middle
Divide Panel (6).
Attach Front Upper Bar (7) to Middle
Divide Panel (6) by inserting Cam
Bolts (A) into corresponding holes
until Front Upper Bar (7) and Middle
Divide Panel (6) meet.
Tighten by rotating Cam Locks (C)
clockwise with Phillips screwdriver
(not included).
Notice: Make sure that all finished
edges are facing towards the front
of the unit.
Figure 2
Note: Align Screws by hand before
using screwdriver.
Attach Wood Stoppers (15) to Front
Upper Bar (7) with Screws (N).
Tighten Screws (N) with Phillips
screwdriver (not included).
6
7
C
A
15
Vanity Sink
Assembly Instructions