Owner Manual

!
#!
Table Assembly
Step 1:
• Place the Table top (A) on a soft surface.
Line up the holes on the table legs (D) and
table top (A). Insert bolt M6x20(AA) through
flat washer (CC), using allen wrench (DD).
Step 2:
• Place the connector bracket (C) between
the four table legs (D).
• Attach the connector bracket (C) to the
table leg (D) by lining up the screw holes
on the connector bracket (C) with
corresponding screw holes on the table leg
(D).
• Insert the M6x25 screws (BB) with flat
washer (CC) and tighten using the allen
wrench (DD).
• Do not completely tighten screws– only
hand tighten.
• Repeat the same step to secure all four
table legs (L) to the connector bracket (C).
Step 3:
• Turn the table right side up. Place glass (B)
on the top.
• You can now enjoy your new table.