Specification Sheet

ManualsBrandsRectorseal ManualsCoolingFix-It-Foot Rubber Riser, supports up to 220 lbs., 10" L

Big Foot Systems | Technical Data

Big Foot Systems Apex Way Hailsham East Sussex BN27 3WA United Kingdom

t +44 (0)1323 844 355 f +44 (0)1323 844 959 sales@bigfootsystems.co.uk www.bigfootsystems.co.uk

BIG FOOT 4/09

Typical Application

Dimensional Data & Product Weights

Fix-it Foot

For supporting small pipe work systems, ductwork runs & cable trays.

Also can be used to support lightweight air conditioning units on flat roofs.

Four sizes of Fix-it Foot are available:

40mm x 20mm Aluminium Channel supplied recessed & bonded into the top face of the foot.

Suitable for internal or external applications in

temperatures between -20°C to +80°C

Maximum recommended load per Fix-it Foot:

PLEASE NOTE THAT THE FIX-IT FOOT IS SUPPLIED WITHOUT ANY FIXINGS OR FITTINGS

Fix-it Foot

Length

(mm)

Width

(mm)

Height

(mm)

Weight

(Kg)

Part No.

250 250 180 95 2.3 B6735

400 400 180 95 3.7 B6736

600 600 220 95 5.5 B6737

1m 1000 180 95 9.3 B9096

Fix-it Foot

Max. load

(Kg)

250 100

400 200

600 300

1m 500

Accommodates

Working Conditions

Summary of content (6 pages)

PAGE 1
Big Foot Systems | Technical Data Fix-it Foot Typical Application For supporting small pipe work systems, ductwork runs & cable trays. Also can be used to support lightweight air conditioning units on flat roofs. Dimensional Data & Product Weights Four sizes of Fix-it Foot are available: Fix-it Foot Length (mm) Width (mm) Height (mm) Weight (Kg) Part No. 250 250 180 95 2.3 B6735 400 400 180 95 3.7 B6736 600 600 220 95 5.5 B6737 1m 1000 180 95 9.
PAGE 2
Big Foot Systems | Technical Data Fix-it Foot Rubber Foot Quality Assurance Raw materials are selected from ISO9002 registered suppliers Construction Pressure moulded using a one or two part mix, utilising milled, sieved & graded Styrene Butadiene Rubber (SBR-Recycled Rubber). Bound using a ratio of high quality moisture curing Polyurethane Pre-Polymer. Manufactured with a built in shrinkage allowance.
PAGE 3
Big Foot Systems | Technical Data Fix-it Foot 250 Technical Drawing 250 75 95 40 20 40 180 ( 90 ) 235 BIG FOOT LOGO, FIX-IT FOOT NAME & CONTACT DETAILS MOULDED-IN 40 x 20mm EXTRUDED ALUMINIUM CHANNEL GLUED INTO TOP RECESS BIG FOOT 4/09 GROUND VULCANIZED RUBBER (UV RESISTANT) Big Foot Systems Apex Way Hailsham East Sussex BN27 3WA United Kingdom t +44 (0)1323 844 355 f +44 (0)1323 844 959 sales@bigfootsystems.co.uk www.bigfootsystems.co.
PAGE 4
Big Foot Systems | Technical Data Fix-it Foot 400 Technical Drawing 400 75 95 40 20 40 180 ( 90 ) 385 40 x 20mm EXTRUDED ALUMINIUM CHANNEL GLUED INTO TOP RECESS BIG FOOT 4/09 BIG FOOT LOGO, FIX-IT FOOT NAME & CONTACT DETAILS MOULDED-IN GROUND VULCANIZED RUBBER (UV RESISTANT) Big Foot Systems Apex Way Hailsham East Sussex BN27 3WA United Kingdom t +44 (0)1323 844 355 f +44 (0)1323 844 959 sales@bigfootsystems.co.uk www.bigfootsystems.co.
PAGE 5
Big Foot Systems | Technical Data Fix-it Foot 600 BIG FOOT 4/09 Technical Drawing Big Foot Systems Apex Way Hailsham East Sussex BN27 3WA United Kingdom t +44 (0)1323 844 355 f +44 (0)1323 844 959 sales@bigfootsystems.co.uk www.bigfootsystems.co.
PAGE 6
Big Foot Systems | Technical Data Fix-it Foot 1m Technical Drawing MAXIMUM LOAD PER FOOT: 55Kg TEMPERATURE RANGE: –20 TO +80°C 75 95 40 20 40 180 90 1000 975 40 x 20mm EXTRUDED ALUMINIUM CHANNEL GLUED INTO TOP RECESS GROUND VULCANIZED RUBBER (UV RESISTANT) BIG FOOT 4/09 Big Foot Systems takes no responsibility for the condition of the roof on which our equipment is to be used.