User Guide

2601 Spenwick Drive - Houston, TX 77055
800-231-3345 www.rectorseal.com
CHECK ®
CLEAN
EXTENDABLE BACKWATER VALVE
MAINTENANCE GUIDE
With appropriate maintenance, this
valve will protect your property from
sewer backups due to
system overloads,
blockages and
ooding. It is your
responsibility to
have this valve checked
periodically to ensure that it is operating
properly. Under normal installation and
use, a three month inspection interval is
recommended. It is also recommended
that a licensed plumber perform these
inspections.
Your
property is
now protected
from sewage
backups by a
Clean Check
®
extendable
backwater
valve.
Extendable Backwater Valve
Maintenance Guide
Clean Check®
▼
Clean Out
▼
4/15 953245
Flapper removal:
With a athead screwdriver,
push down through the lower
collar mount to the bottom
clip edge of the apper insert.
Pull old apper straight
back and out.
Flapper replacement:
Snap in the replacement
apper by pushing it straight
into the lower collar mount.
7¼
For Clean Check
tted with 6"
adaptor/plug,
replace with apper
Part No. 96980
9¼
For Clean Check
tted with 8"
adaptor/plug,
replace with apper
Part No. 96982
Replacement apper:
Two sizes of
replacement appers
are available from
your local plumbing
contractor or wholesale
supplier. Check for the
correct size for your
Clean Check.