MSDS
N/A
SKIN CONTACT
Wash thoroughly with soap and water.
INGESTION
Drink plenty of water. Consult physician. Do not induce vomiting.
SUMMARY OF CHRONIC HAZARDS
None known.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE
Open cuts or abrasions or rashes on skin.
=============================================================================
Section 4 -- FIRST AID MEASURES
-----------------------------------------------------------------------------
If INHALED: If overcome by exposure, remove victim to fresh air
immediately. Give oxygen or artificial respiration as
needed. Obtain emergency medical attention. Prompt
action is essential.
If on SKIN: Use a rag to remove excess from skin and remove
contaminated clothing. Use of mild solvent, such as
acetone (nail polish remover) or mineral spirits, may help
in removing uncured residue from clothing or other
surfaces (avoid eye contact). Cured resin may be physically
removed by persistent washing with soap and water. If
irritation develops, use mild skin cream. If it persists,
obtain medical attention.
If in EYES: Flush eyes with large amounts of water for 15 minutes.
Get medical attention if irritation persists.
If SWALLOWED: If swallowed, call a physician immediately. Only induce
vomiting at the instruction of a physician. Never give
anything by mouth to an unconscious person.
=============================================================================
Section 5 -- FIRE FIGHTING MEASURES
-----------------------------------------------------------------------------
FLASH POINT LEL UEL
> 350 F (177 C) ASTM D-93 (Closed Cup) N/A N/A
Nil for uncured product
EXTINGUSING MEDIA
Dry chemical, carbon dioxide, halon 1211, chemical foam, or water spray if
used in large quantities (water contamination will produce carbon dioxide).
SPECIAL FIRE FIGHTING PROCEDURES: Wear self-contained breathing apparatus and
other protective clothing.
UNUSUAL FIRE AND EXPLOSION HAZARDS: None
=============================================================================
Section 6 -- ACCIDENTAL RELEASE MEASURES
-----------------------------------------------------------------------------
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: If package splits
or breaks, ensure ventilation is adequate to prevent build up of potentially
harmful vapors. Scrape up material and place into container for disposal.
Decontaminate area and equipment with dilute ammonia and detergent. Mix
additional absorbent into spill and dispose.
=============================================================================
Section 7 -- HANDLING AND STORAGE
-----------------------------------------------------------------------------
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store in a cool, dry,
well ventilated area out of direct sunlight. Store away from all heat
sources. Optimum storage conditions 40F-83F. For best results, rotate
stock.
OTHER PRECAUTIONS: Removal with oscillating saws without adequate ventilation
will potentially cause irritant dusts to be generated into atmosphere. The
use of shears is recommended to remove old product from pipes so as to
minimize dust formation.
Page
2
of
4
8/2/2010
http://www.rectorseal.com/files/285/RectorSeal%20Pipe%20Repair%20Kit.html