Instructions / Assembly

INSTRUCTIONS:
READ ALL DIRECTIONS, MSDS AND WARNINGS ON LABEL BEFORE USING
1. Clean and dry all surfaces. Completely remove all dirt, grease and soap.
2. Cut nozzle at desired bead size, apply bead of silicone.
3. Most paint will not adhere to silicone. Surface should be painted first, then seal.
4. Silicone "skins over" and becomes tack-free in 15 minutes, cures in 1 hour. Allow 24 hours for full cure and strength.
For additional technical information, call Toll Free 1-800-231-3345.
PRECAUTIONS:
FOR CHEMICAL EMERGENCY, SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT,
CALL CHEMTREC - DAY OR NIGHT 1-800-424-9300
CAUTION!
Uncured caulk causes irritation
Caulk releases acetic acid (vinegar-like odor) during cure. PRECAUTIONS: Avoid contact with eyes and skin.
Contact lens wearers take appropriate precautions. FIRST AID: Eyes - Flush eyes with water. Call physician. Skin
- Remove from skin with a dry cloth or paper towel. Ingestion - DO NOT INDUCE VOMITING. Only if conscious, give
large amounts of water. FIRE AND SPILLS: For fire, use water fog, CO
2
, foam, or dry chemicals. Wipe up spills to
prevent footing hazard. STORAGE AND HANDLING: Store in cool area. Keep container tightly closed. Do not reuse
empty container. KEEP OUT OF REACH OF CHILDREN.
For additional information, refer to Material Safety Data Sheet.
SPECIFICATIONS:
Wt/Gal @ 77⋅ F 8.9 ± .5 lbs./gal.
Flash Point SETA CC N/A
Color Red
Shelf Life 1 year minimum
Suggestions and recommendations covering the use of our products are based on our past experience and laboratory findings. However, as we have no control as
to the methods and conditions of application, we only assume responsibility for the uniformity of our products within manufacturing tolerances.
LIMITED WARRANTY:
RectorSeal makes the Limited Express Warranty that when the instructions for storage and handling of our products are followed we warrant our products to be free from defects. THIS LIMITED
EXPRESS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, AND OF ANY OTHER OBLIGATION ON THE PART OF RECTORSEAL. The sole remedy for breach of the Limited Express Warranty shall be the refund
of the purchase price. All other liability is negated and disclaimed, and RectorSeal shall not be liable for incidental or consequential damages.
MANUFACTURED IN U.S.A.
RectorSeal • 2601 Spenwick Drive • Houston, Texas 77055-1035
Telephone: [phone] or 1-800-231-3345 Fax: [phone] or 1-800-441-0051
www.rectorseal.com
B-02
RECTORSEAL® HI-TEMP
Silicone Caulk