Safety Instructions

17
Note Possible Cause Action
The pump is not working.
No electricity Inspect the electrical wall outlet.
DC power adapter Verify that the DC power adapter cable is
connected to the DC adapter socket on
the console, and the DC power adapter is
connected to the 100-240 Volt wall outlet.
DC power adapter cable Examine the cable for any defects.
The Status Indicator is On in yellow Malfunction Contact Therabody.
The pump starts working and stops
immediately.
The air cannot move through the
garment hose.
Examine hoses for kinks, twists and folds.
Indications for Use
RecoveryAir is indicated for the temporary relief of minor muscle aches and pains, and for
the temporary increase in circulation to the treated areas in people who are in good health.
RecoveryAir simulates kneading and stroking of tissues by using an inflatable garment.
Note
• The pump is “multi-voltage” and can be used for travel.
• An appropriate socket adapter must be used in countries with incompatible wall outlets.
• Use only RecoveryAir garments with the RecoveryAir pump.
• When immediate garment deflation is necessary, disconnect the garment hose bundle
from the pump to immediately deflate the air pressure in the garment.
Troubleshooting