Safety Instructions

11
Caution
• Do not operate the RecoveryAir Prime Compression System while operating a vehicle.
• Do not store or transport the RecoveryAir Prime Compression System beyond the specied temperature, humidity, and
atmospheric pressure range.
• Do not use the RecoveryAir Prime Compression System beyond the specied temperature range: 10 to 30°C (50 to 86°F).
• Do not use the RecoveryAir Prime Compression System beyond the specied humidity range: 30%rH–75%rH, non-condensing.
• Only use the RecoveryAir Prime Compression System up to 3000m above mean sea level.
• To prevent any damage to the RecoveryAir Prime Compression System, keep it away from dust, lint, and dirt. Keep away from
sources of heat or moisture.
• To prevent any damage to equipment, use only accessories, detachable parts, and materials described in this User Manual.
• While in use, place the pump on a horizontal rm surface only. Do not place the pump on a bed, blanket, mattress, pillow, or soft
furniture. Do not cover the pump.
• The equipment is to be installed and put into service according to the EMC information provided in Chapter 11 - EMC
Manufacturer Declarations.
• Portable and mobile RF communication equipment might aect the equipment.
• For indoor use only.
• Use only the DC power adapter provided with the pump.
• When the system has been stored in extreme temperature conditions of -20°C (-4°F) or 70°C (158°F) between uses, wait for two
(2) hours before using the system.
• The massage sensation should be pleasant and comfortable. If you experience pain or discomfort during or after the massage or if
there is onset of bruising or irritation during or after the massage, discontinue use and consult your physician.
• Do not hand or machine wash. Surface wipe only.
• Do not allow liquid to get into the air inlets.
• Do not use bleach.
• Do not dry clean.
• Do not wring, iron, tumble, or force heat dry.
Important Safety Information