Safety Instructions

8
Superior, hygienic design
It’s important to take proper care of your RecoveryAir JetBoots compression boots because
the longer they last, the longer you will feel the benefits. Each boot has non-porous medical
grade material that helps fight bacteria and provide a resistant surface. Our internal overlapping
chambers provide a smooth surface to clean, this means no wiping under chamber flaps where
bacteria can build up. This also means, no smells.
How to Clean
Here are simple steps to cleaning your RecoveryAir JetBoots:
1. Unzip the boots completely and lay them on a flat surface.
2. Take a disinfectant wipe or spray, and gently clean the inside of the boots. Avoid any oil
based cleaning product.
3. Once you have cleaned your garment, make sure to fully dry the surface by hanging them
up or wiping them down.
4. We also recommend you wipe down the exterior of the pump to reduce surface
contaminants. Avoid using sprays or soaking wet wipes on the back of the pump due to
the air vents. Clean with caution.
What it is and why it’s important:
We use medical-grade material covering the internal chamber to help reduce the potential for
microbial growth and moisture retention. Whether you are an individual, or a clinic, our boots
are designed to help limit the potential for bacterial transmission.