User's Manual

USER MANUAL P/N UM1400-00-09 8/10/20 Pg 23
Recovery Force 10022 Lantern Rd., Suite 100, Fishers, IN 46037
Contact Recovery Force Customer Service at 1 866.745.7445 to report unexpected
operation or events and to receive replacement instructions for any damaged
items.
If you have any questions or comments about setting up or maintaining this device,
call us at 1 866.745.7445 or visit our website www.recoveryforcusa.com/contactus
C.2 Cleaning the Movement and Compressions System
The Movement and Compression System hardware (Controller, Charging Hub, and
battery) can be cleaned wiping down the outer surfaces using a soft cloth
dampened with water or a mild detergent. To sanitize the hardware, apply
cleaning agent with a cloth or wipe. Avoid excessive spraying, especially in the
areas of the connection ports of the Controller. If any liquid enters the ports, then
internal component damage will likely result. The table below provides optional
cleaning products and their chemical components.
Chemical Cleaners (approximate concentrations)
Commercial Example
90% Isopropanol Alcohol
Generic
0.63% Bleach
PDI® Sani-Cloth Bleach
Germicidal Disposable
Wipe
0.25% dimethyl ethylbenzyl ammonium chlorides, 0.25%
dimethyl benzyl ammonium chlorides, 55.00% Isopropyl Alcohol
PDI® Super Sani-Cloth
Germicidal Disposable
Wipe
8.704% Didecyl dimethyl ammonium chloride, dimethyl benzyl
ammonium chloride 8.190% used at a 1:256 dilution
Diversey™ Virex II 256 One-
Step Disinfectant Cleaner &
Deodorant
CAUTION: The Strap should ONLY be wiped down with mild soap and water due
to the contact and exposure to the user’s leg.
CAUTION: