User's Manual

USER MANUAL P/N UM1400-00-09 8/10/20 Pg 21
Recovery Force 10022 Lantern Rd., Suite 100, Fishers, IN 46037
The Charging Hub is the only way to charge the replaceable batteries of the
Movement and Compressions System.
Only place the batteries of the Movement and Compressions System in the
Charging Hub.
NOTE: The batteries for the Movement and Compressions System come partially
charged and will likely need to be charged before first use. Use of the wrong
charger can cause excessive heat, damage to the charging circuit and shorten the
life of the battery
It should take approximately 4 hours to charge a fully depleted battery.
When Controller is not in use, hang on Charging Hub for storage.
To charge the battery:
a. The AC Power Cord of the Charging Hub must be plugged into a wall outlet.
Verify that the outlet is not obstructed in any way for quick disconnect from
outlet.
Charging Hub Indicator Lights
FLASHING GREEN: When the Charging Hub is plugged into the wall outlet
with batteries present but not fully charged, the LED shall indicate charging
by flashing green.
SOLID GREEN: When the device is fully charged, the LED shall indicate a full
charge by a solid green light.