Instructions

The Pearl sinks its teeth into the low
end and doesn’t let go. Its modified
vintage circuit delivers heavy bass fuzz
tone with versatile controls to work
with your music. This pedal was created
for bass, but you can also plug your
guitar into it to make your low-end
dreams come true!
At the heart of the pedal is an all-
analog silicon design that sounds great
with any pickup type. We use hand-
picked, new-old-stock “oil can” BC109
transistors that add a classic, vintage
tone to this modern fuzz.
The user interface includes a range of
controls including intensity, tonality,
compression, output level, and a
high/low switch that affects the amount
of bottom end. The Pearl is a compact,
simple to use, player-friendly pedal
with a monster, low-end tone. In short,
it is a force to be reckoned with.
Controls
Destroy: This control adjusts the depth
of distortion and the length of sustained
sounds. Rotating the knob clockwise
creates greater distortion and longer
sustain time.
Grip: This control adds compression to
the overall sound and evens it out
dynamically.
Scope: This parameter controls the tone
of the overall sound. Rotating clockwise
cuts lower frequencies, creating sharp
sounds. Rotating the knob
counterclockwise cuts higher
frequencies, creating softer, warmer
sounds.
Level: This control adjusts the output
level of the Pearl. There's plenty of
volume at hand, so it is possible to go
beyond your initial input level if you wish.
Low / High switch: Toggle between low-
end bass fuzz tone and more traditional
guitar fuzz tone.
PEARL PEDAL
(Heavy Low-End Vintage Fuzz)