User`s manual

Recordex® StudioJet 50™/StudioJet 100™ AutoPrinter - QuickStart Guide
Verify the contents of your package against the image below.
Using a pair of scissors cut the plastic packing strip holding the disc tray in
place.
Remove plastic film from printer chassis. (NOTE: Once plastic film is removed
the printer can not be returned for a refund.)
Save the box and packaging material for return shipment should your printer
require service.
STEP 1: Unbox and Verify Contents
Figure 1.1 Printer Contents
NOTE: StudioJet 50 Depicted. StudioJet 100™
will include a 100 capacity output bin and longer
input spindles.