User`s manual

Recordex® StudioJet 50™/StudioJet 100™ AutoPrinter - QuickStart Guide
STEP 8: Using Discus For the First Time
The first time you use Discus you will need to unlock the software by entering
the software serial number/registration key. This number can be found on
the front of your installation disc. If you can’t find your install disc check your
DVD/CD drive since you likely just finished installing Discus!
The software is quite easy to use and after a few minutes of experimenting
you’ll be creating incredible labels. We recommend reading through the Dis-
cus User Manual (available on the help menu when using Discus) to familiar-
ize yourself with the application. Note: the manual includes how to create
jewel case inserts. This function is not available with the version of Discus
bundled with your printer, however, the layout methods are the same for la-
bels and inserts so it is still worth reading!
• Try using your own pictures. You’ll be amazed at the photo-quality printing
you can achieve with your StudioJet™ Disc AutoPrinter.
• Experiment with Discus. You’ll learn the fastest if you just sit down and
play with the software.
• Be sure to select the type of media that you are using on the Print tab (I.e.
Hub-Printable, or Standard).
• If your StudioJet™ isn’t set as your default printer, you’ll need to
remember to select it as your printer when you print from Discus,
otherwise you’re disc print job will be sent to one of the other printers
installed on your computer.
Phone: [phone] (10am to 7pm PST)
Fax: [phone]
Email: [e-mail]
Web: http://www.magicmouse.com/h_support.html