Instruction manual

23 ©RECONYX, Inc.
Additional Camera Options
IR Mask
If you need to clean the IR Array window, the IR Mask™ is easily removed by
carefully inserting a small screw driver in the left or right side to pry it out.
Warning: Be very careful not to scratch the IR Array window!
Step 1
Step 2
Step 3
The windows covering the IR Array, lens, WalkTest indicator and light meter,
may all be cleaned with glass cleaner or water using a soft non-abrasive cloth.
To replace the IR Mask™, carefully line up one side of the IR Mask™ with the IR
Array window. Then gently push on both sides until the IR Mask™ is completely
seated against the window and snaps into both sides.
Step 1
Step 2
Step 3