User's Manual

www.reconyx.com 8
Request Image
Will allow you to take an image of what is in front of your camera and have it saved in
your Photos in the app.
Aim Mode
This feature will allow you to check your cameras
placement to be sure it is aimed correctly.
If you have “Real Time Access”, you can enter Aim
mode in the Connect app any time the camera is on
and armed. The app will wake up the camera to start
aim mode.
If you do not have “Real Time Access”, you will need to
put your camera into “Cell Aim Mode” using the menu
on your camera. Once in Cell Aim Mode the camera
will take and send a photo every 5 seconds, allowing
you to adjust the placement of the camera to capture
the area of interest correctly.
You can also “Show motion zone overlay” to see
approximately where motion will trigger the camera.
NOTE: These images will not be saved to your
photos for viewing later.