User's Manual

21 RECONYX
®
, Inc.
Additional Camera Options
IR Mask
If you need to clean the IR Array window, the IR Mask™ is easily removed by
carefully inserting a small screw driver in one of the small slots and prying it out.
Warning! Be very careful not to scratch the IR Array window!
Step 1
Step 2
The windows covering the IR Array, lens, WalkTest indicator and light meter may
all be cleaned with glass cleaner or water using a soft non-abrasive cloth.
To replace the IR Mask™, carefully line up one side of the IR Mask™ with the IR
Array window. Then gently push on both sides until the IR Mask™ is completely
seated against the window and snaps into both sides.