User's Manual

9
OCU3 FEATURES
OCU3 AUDIO/VIDEO-OUT CAPABILITIES
The OCU3 is capable of receiving audio transmitted
from the Throwbot 2 robotic system. To listen, plug
headphones into the appropriate jack on the bottom
of the OCU3. Headphones with in-line volume control
adapters approved for use with certain smartphones may
not work with the OCU3. Volume is controlled through a
touch screen interface.
If the OCU3 is recording, the audio will still be recorded,
even if the outputs are muted.
The ReconRobotics Audio/Video (A/V) Out Cabling
Package (sold separately) can be used to connect the
OCU3 to an external monitoring / recording device (not
included). The A/V Out jack is located on the bottom side
of the OCU3.
Once connected to the OCU3, connect the other end
of the A/V Out cable to the appropriate connector on
an external device. Please refer to the instruction card
provided with the A/V Out Cabling Package for more
information.
BRIGHTNESS CONTROL
The OCU3 allows for control the LCD brightness via a touch-
screen interface. When powered on, the brightness will
default to whatever it was last set to. It may be useful to set
this to the dimmest setting prior to missions in the dark so as
to not inadvertently illuminate the operator.
RECORDING
The OCU3 has integrated digital video recording
capabilities. Video is stored in the MPEG-4 format on a user
removable SD Card. To activate recording, click the record
icon on the touch screen interface.
Touch Screen
Volume Control
Touch Screen
Brightness Control
Touch Screen
Record Control