User's Manual

24
THE ROBOT HAS BEEN EXPOSED TO BLOOD OR
OTHER BIOLOGICAL HAZARDS. WHAT CAN I USE
TO CLEAN IT?
We recommend cleaning the robot with one of
the below:
• Bleach
• Ammonia
• Isopropyl Alcohol
• SaniZide Plus
®
• Spray Nine
®
/ Spray Nine
®
Heavy Duty
• Fantastik
®
Heavy Duty
• Simple Green
®
When cleaning, remember to do the following:
• Spray or wipe down the robot with your preferred
cleaner, then rinse under water.
• It is best to dry off the robot as soon as possible; do
not soak in a cleaning solution or in water more than
necessary.
• For the deepest clean, remove the wheels and tail and
wash them separately.
• Until the robot is completely dry, do not insert the dust
cover into the USB connector.
ARE THERE TRANSLATIONS OF THIS USER MANUAL
AVAILABLE?
• For the most current version of the User Manual, along
with all available translations of the User Manual,
please visit our website at www.reconrobotics.com.
User consents to abide by the terms and conditions of
the most recent update/published version of the User
Manual.
HOW DO I REQUEST SERVICE IF I AM
STILL EXPERIENCING PROBLEMS WITH MY
RECONROBOTICS EQUIPMENT?
• See page 28 for instructions on returning kits for
support.
WHERE CAN I FIND THE SERIAL NUMBERS ON MY
TROUBLESHOOTING / FREQUENTLY ASKED QUESTIONS CONTINUED