User's Manual

14
INSTRUCTIONS FOR USE: CHARGING CONTINUED
GENERAL CHARGING GUIDELINES
1. Ensure the robot and OCU are off before charging.
2. Prior to charging ensure the charge plugs and
receptacles are dry, debris free, and not damaged.
If anything appears damaged, contact support@
reconrobotics.com for assistance.
3. Plug the AC electrical cord into charger and plug
charger into the power source before charging.
4. Fully insert the appropriate charger cord into the
OCU or robot. Do not force a connection. Ensure
connecting plugs are not bent during insertion or
removal.
5. Remove robot and OCU from charger when charging
is complete or keep everything connected to trickle
charge and maintain a full battery. Charge your
robot and OCU at least once per month to ensure
the batteries are kept topped off to be ready for
immediate deployment.
6. Always charge in a cool, ventilated, and re-
safe area.
7. Do not leave devices charging unattended.
8. After charging, make sure the dust covers are in place
on the Throwbot 2 robot and OCU3.
9. If there is an unusual sound, smoke, or burning odor
emitted from any of the components during charging,
discontinue charging, unplug the equipment and
contact [e-mail] for assistance.