User manual

Page7 MOD Live User Manual | Version 1.1 | © 2012 Recon Instruments Inc | All rights reserved | www.reconinstruments.com
Charge Up Mod Live
1. MakesureMODLiveisturnedobeforeyoustart.
2. TurnonyourPCorMac.Makesurethecomputerisnotin
standbymode.
3. FindtheMODLivepowerbuonlocatednexttothemicroUSB
port.Holddownthepowerbuonfor3seconds.
4. Plug the micro USB cable’s smaller end into MOD Live’s micro
USB port.
5. PlugtheUSBcable’slargerendintotheUSBportinyourPC
or Mac. WhenMODLivebeginscharging,aredlightappears
directlyabovetheUSBport.
6. Wait for the red light to disappear.
7. Navigateto“safelyremoveorejectthehardware”usingyour
PCorMacbeforeyoudisconnecttheUSBcablefromMODLive.
8. Disconnect the adapter.
9. RemovetheUSBcableandsealthemicroUSBghtly.Usethe
plascUSBportcovertoensuretheportisprotectedfromrain,
snow and ice.
NOTE:Inopmalcondions,MODLivecanachieveafastcharge(80%ofbaery)using
yourcomputerorACadapterin1hour.MODLivecanbefullychargedin3hours.Formore
informaon,seetheseconBATTERYCARE,laterinthisguide.