User manual

Page 65 MOD Live User Manual | Version 1.1 | © 2012 Recon Instruments Inc | All rights reserved | www.reconinstruments.com

1. Makesureyourcomputeristurnedon,
andnotinstand-bymode.
2. MakesureMODLiveisturnedo.Ifthe
unitison,holddownthepowerbuonfor
2 seconds.
3. Connect the USB cable shipped with MOD
Live. Plug the micro USB cable’s smaller
end into the micro USB port located under
theprotecvecoverontherightsideof
the goggles. Plug the USB cable’s larger
endintotheUSBportinyourPCorMac.
4. CheckthataredlightabovetheUSBport
appears. This shows that MOD Live is
charging.
5. Tip:Ifyourcomputerdoesnotrecognize
MODLive,tryreinserngtheUSBcable.
6. TheredUSBportlightturnsowhenMOD
Live is charged.

1. Connect the USB cable shipped with MOD
Live. Plug the micro USB cable’s smaller
end into the micro USB port located under
theprotecvecoverontherightsideof
the goggles
2. Plug the USB cable’s larger end into either
the North American or European AC
adaptershippedwithyourunit.
3. Plug the AC adapter into a wall outlet.
4. CheckthataredlightabovetheUSBport
appears. This shows that MOD Live is
charging.
KeepchargingunltheredUSBportlight
turnso(whichindicatesMODLiveisfully
charged).
Baery