User manual

Page 6 MOD Live User Manual | Version 1.1 | © 2012 Recon Instruments Inc | All rights reserved | www.reconinstruments.com
Charge Up Mod Live
1. TofullychargeMODLiveusinganACadapter:
2. MakesureMODLiveisturnedobeforeyoustart.
3. AssembletheACadapterbyinserngtheNorthAmerican
or European plug.
4. Insert the large plug of the USB cable into the adapter port.
5. Pop open the cover of MOD Live’s USB port. Tip: the port
covershowsanyimageofaUSBcable.Insertthesmaller
plugintoMODLive’sUSBport.Checkthattheplug’s7L
leeringappearsontheoutsideofthegoggle.
6. Plug the adapter into a power outlet. When MOD Live
beginscharging,aredlightappearsdirectlyabovethe
USBport.Ifthebaerywasdrainedaertheunitlethe
factory,itcantakeupto3hoursforthebaerytobecome
fullycharged.
7. Aertheredlightdisappears,disconnecttheadapter.
Remove the USB cable from MOD Live.
8. ReplacetheplascUSBportcovertoensuretheportis
protectedfromrain,snowandice.
NOTE:AlwaysusetheReconACadapterandUSBcableshippedwithyourunit.
Neverusethird-partycablesoradapters.