User manual

Snap MOD Live into goggles

1. Remove the lens from the goggle frame.

Seeinstruconsprovidedbythegoggle

manufacturer.

2. Ontheframeofyourgoggles,removethe

protecvebadgefromthelesideofthe

frame. This will reveal slots for MOD Live

to be inserted.

3. Next,insertMODLiveintothegoggle

frame as follows: with the goggles facing

you,snaptheMODLivemicroopcs

displayunitintotheleinnercornerof

theframe.Next,insertthebaerypack

into the right corner.

4. Push the MOD Live cable into the groove

sothatittsghtly.

5. Ifthecableistooshort,tugitgentlyso

the white stripes appear. If the cable is

toolong,pushitbackin.

6. Insertthelensbackintothegoggles.Take

care not to touch or smudge the lens.

OnlyusegogglesthatareRecon-Ready®.2011ReconReady™partnersinclude:

Uvex®,Briko®,Zeal®,andAlpina®.

LearnmoreaboutRecon-Readygogglesathp://www.ReconReady.com