User manual

Page 9 MOD User Manual | January 2012 | © 2012 Recon Instruments Inc | All rights reserved | www.reconinstruments.com
Toaachthewriststrap:
1. Slip either end of the Velcro strap
(rough side facing out) into the
remote’s handle. Tip: insert the strap
at a diagonal, and either pull or push
it through the handle.
2. Alignthe“V”oftheVelcrostrapwith
the edge of the controller. Push down
unlyouhearaclick.
3. Stretch the strap and insert the other
endoftheVelcrostraprepeang
steps 1 and 2.
4. AachVelcroaroundthecuofyour
gloveorjacketandpullitforasnug
t.Or,usethestraponajacketbeltor
backpack.
Aachastrap