User manual

Page 7 MOD User Manual | January 2012 | © 2012 Recon Instruments Inc | All rights reserved | www.reconinstruments.com
Charge up MOD
To charge MOD using your PC or Mac computer:
1. TurnonyourPCorMac.Makesurethecomputeris
NOTinstandbymode.
2. PlugthemicroUSBcable’ssmallerendintoMOD’s
micro USB port.
3. PlugtheUSBcable’slargerendintotheUSBportin
yourPCorMac.AssoonasMODbeginscharging,ared
lightappearsdirectlyabovetheUSBport.
4. Aertheredlightdisappears,navigateto“safely
remove or eject the hardware” using your PC or Mac
beforeyoudisconnecttheUSBcablefromMOD.Then
disconnect the adapter.
5. SealtheUSBportwiththeplasccap,thenghtlypush
down on the USB cover to ensure no rain, snow or ice
aectstheport.
Ifthebaerywasdrainedaertheunitlethefactory,itcantakeupto3hoursforthe
baerytobecomefullychargedalthoughyoucanachievean80%chargewithinanhourin
opmalcondions.