User manual

Page 36 MOD User Manual | January 2012 | © 2012 Recon Instruments Inc | All rights reserved | www.reconinstruments.com
MODTroubleshoongFAQ
Youcanquicklyndsoluonsbyfollowing
stepsandadviceinthissecon.
MOD DISPLAY
Why is my
displayblank?
This happens when you leave your goggles stored in a very cold
locaon(outdoorsovernight,inthetrunkofavehicle).
Stepstotake:
1. WarmupMOD(withthepowerturnedo)foratleastten
minutes. Move indoors.
2. If the display doesn’t appear when you turn the power on, charge
uptheMODbaeryforanhourusingtheReconACadapter.
3. Iftheproblempersists,contactReconSupportat
[e-mail]
• FollowusonTwier:twier.com/@Reconinstrument
• FollowusonFacebookatfacebook.com/reconinstruments.
• SearchforSupportFAQsathp://support.reconinstruments.com
Why does the display
lookedwashedout?
Thisproblemistemporary,andithappensaeryouleavethegoggles
are out in the sun. Direct sunlight reacts with the liquid crystal
display.
Stepstotake:
1. Moveyourgogglesintotheshade,orcoverthemunlthe
brightnessandcoloursreturntonormal.
2. Iftheproblempersists,contactReconSupportat
[e-mail]