Datasheet

RS3
www.recom-international.com
E-85
REV:1/2011
12 53678
3.20
0.32
2.0
9.20
21.80
RECOM
RS3-xxxx
****
12 53678
0.50±0.05
4.1 typ.
0.50±0.05
11.10
RECOM
RS3-xxxxS(Z)
****
RECOM
RS3-xxxxD(Z)
****
2.54
2.54
1.0
ø
+0.15/0
Top View
Bottom View
Single Output
Dual Output
3rd angle
projection
Recommended Footprint Details
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Package Style and Pinning (mm)
Pin Connections
Pin # Single Dual
1 –Vin –Vin
2 +Vin +Vin
3 CTRL CTRL
5NC NC
6 +Vout +Vout
7 –Vout Com
8 NC –Vout
NC = No Connection
RS3-S_D(Z)
Series
ECONOLINE
DC/DC-Converter
Application Examples
-Vin
-Vout
+Vout
+Vin
Ctrl
(TTL)
(see text)
10 KW
20 KW
4.7 KW
RS3
Fuse
TTL Remote CTRL Circuit
Voltage to be applied via a limiting resistor with a
recommended value of 1K for RS3-05xx; 3.3K for
RS3-12xx; RS3-24xx and 10K for RS3-48xx.
Control Pin Input Current: 10mA
Voltage Set Point Accuracy
with external input/output
capacitors refer to typ. ± 1%
recommended test circuit: max. ±2%
Control Pin (CTRL) Input
Current, control voltage
applied via 1K resistor,
output voltage must typ. 3mA
reduce to 0V: max. 6mA
-Vin
-Vout
+Vout
+Vin
Remote
(see text)
Optocoupler
RS3
Fuse
Isolated Remote CTRL Circuit
Pin 8 (NC*) This pin is used internally and must have no external connection. Pin 5 (NC) Not connected internally.
Pin 3 (CTRL)
This pin provides an Off function which puts the converter into a low power mode. When the pin is ‘high’ the converter is OFF and when the pin is high ‘Z’ the converter is ON.
There is no allowed low state for this pin.
Notes
Note 1 Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter
Certifications
EN General Safety Report: IL-R7109 EN60950-1:2001 + A11:2004
EN Medical Safety Report: PS071001601 EN60601-1:1990 + A11:1996