Data Sheet

12 53678
3.20
0.32
2.0
9.20
21.80
RECOM
RS-xxxx
****
12 53678
0.50±0.05
3.80
0.50±0.05
11.10
RECOM
RS-xxxx
****
RECOM
RS-xxxxD
****
2.54
2.54
1.0
ø
+0.15/0
Top View
Bottom View
Single Output
Dual Output
3rd angle
projection
Recommended Footprint Details
Application circuit
8 PIN SIP Package
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pin 3 (CTRL)
This pin provides an Off function which puts the
converter into a low power mode. When the pin
is ‘high’ the converter is OFF and when the pin
is high ‘Z’ the converter is ON. There is no allo-
wed low state for this pin. Voltage to be applied
via a limiting resistor with a recommended
value of 1K for RS-05xx; 3.3K for RS-12xx; RS-
24xx and 10K for RS-48xx).
Pin 5 (NC)
This pin is used internally and must have no
external connection.
Pin 8 (NC*)
No external connection allowed.
Control Pin Input Current: 10mA
Voltage Set Point Accuracy
with external input/output
capacitors refer to typ. ± 1%
recommended test circuit: max. ±2%
Control Pin (CTRL) Input
Current, control voltage
applied via 1K resistor,
output voltage must typ. 3mA
reduce to 0V: max. 6mA
ECONOLINE
DC/DC-Converter
RS
Series
Package Style and Pinning (mm)
Pin Connections
Pin # Single Dual
1 –Vin –Vin
2 +Vin +Vin
3 CTRL CTRL
5NC NC
6 +Vout +Vout
7 –Vout Com
8 NC* –Vout
NC = No Connection
NC* = NC, but no external Connection allowed.
DC/DC
Converter
-Vin
-Vout
+Vout
+Vin
Ctrl
1 K
W
L
in
RS- types 4.7µH ~ 100µH
C
out
RS- types 22µF ~ 100µF/25V
Remote ON/OFF
ON: open or high impedance.
OFF: 3---6mA input current applied Via 1KΩ resistor
(OFF stand by current 10mA max.)
January-2007
www.recom-international.com90