Datasheet

www.recom-power.com
REV.: 2/2019 RPM-1
DC/DC Converter
www.recom-power.com/eval-ref-boards
Description
The RPM-6.0 series is a 6A non-isolated switching regulator power module with a full set of features
including adjustable output, sequencing, soft-start control, on/off control, and power good signals. The
ultra-compact module has a profile of only 3.75mm, but with an efficiency of up to 99%, the device can
operate at full load in ambient temperatures as high as +90°C without forced air cooling. The package
is complete with 6-sided shielding for optimal EMC performance and excellent heat management.
6 Amp
Single
Output
RPM-6.0
Features
Power
Module
High power density (L*W*H = 12.19*12.19*3.75)
Wide operating temperature -40°C to +90°C
at full load
Efficiency up to 99%, no need for heatsinks
6-sided shielding
Thermally and EMI enhanced 25 pad LGA package
Compact DOSA-compatible footprint
Low profile
Notes:
Note1: Max. Cap Load is tested at nominal input and full resistive load
Model Numbering
Selection Guide
Part Input Voltage Output Vout Output Efficiency Max. Capacitive
Number Range Voltage Adjust Range Current max. typ. Load
(1)
[VDC] [VDC] [VDC] [A] [%] [µF]
RPM3.3-6.0 4 - 15 3.3 0.9 - 6.0 6.0 88 - 97 800
RPM5.0-6.0 4 - 15 5 0.9 - 6.0 6.0 91 - 99 800
Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)
BASIC CHARACTERISTICS
Parameter Condition Min. Typ. Max.
Internal Input Filter capacitor
Input Voltage
Range
Buck mode
3.3Vout
5Vout
4VDC
5.3VDC
12VDC 15VDC
100% duty cycle mode
(2)
Vout= Vin - Vdrop 5Vout 4VDC 5.3VDC
Absolute Maximum Input Voltage
17VDC
Undervoltage Lockout (UVLO)
DC-DC ON
DC-DC OFF
3.8VDC
3.5VDC
3.9VDC
3.6VDC
4VDC
3.7VDC
Input Current nom. Vin= 12VDC
3.3Vout
5Vout
1.9A
2.8A
Quiescent Current
24µA
Internal Power Dissipation
3.3Vout
5Vout
2.8W
3.0W
continued on next page
max. Output Current
Output Voltage
RPM__-6.0
EN55032 compliant

Summary of content (9 pages)