Datasheet

ManualsBrandsRecom ManualsBoard Mounted DC / DC ConvertersDC/DC Converter 30W 12V 1.25A

Features

Regulated

Converters

• 2:1 Wide Input Voltage Range

• 1.6kVDC Isolation

• UL Certiﬁed

• Efﬁciency up to 90%

• Six-Sided Continuous Shield

• Available as Power Module (RPM30-E)

PD-1

REV.: 2/2017www.recom-power.com

DC/DC Converter

Description

The RP30-E series DC/DC converters are certiﬁed to UL 60950-1 and cUL 60950-1. This makes them

ideal for all telecom and industrial applications where approved safety standards are required. The

industry standard 2” x 1.6” package meets military standards for thermal shock and vibration tolerance

E196683

30 Watt

Single &

Dual

Output

RP30-E

Selection Guide

Part Number Input Output Output Input

(1)

Efﬁciency

(1)

Max. Capacitive

Voltage Range Voltage Current Current typ. Load

(2)

[VDC] [VDC] [mA] [mA] [%] [µF]

RP30-123.3SE

(3,4)

9-18 3.3 6000 1941 85 19500

RP30-1205SE

(3,4)

9-18 5 6000 2874 87 10200

RP30-1212SE

(3,4)

9-18 12 2500 2841 88 3240

RP30-1215SE

(3,4)

9-18 15 2000 2841 88 1100

RP30-243.3SE

(3,4)

18-36 3.3 6000 959 86 19500

RP30-2405SE

(3,4)

18-36 5 6000 1420 88 10200

RP30-2412SE

(3,4)

18-36 12 2500 1404 89 3240

RP30-2415SE

(3,4)

18-36 15 2000 1404 89 1100

RP30-483.3SE

(3,4)

36-75 3.3 6000 474 87 19500

RP30-4805SE

(3,4)

36-75 5 6000 702 89 10200

RP30-4812SE

(3,4)

36-75 12 2500 694 90 3240

RP30-4815SE

(3,4)

36-75 15 2000 694 90 1100

RP30-1212DE

(3,4)

9-18 ±12 ±1250 2874 87 ±1020

RP30-1215DE

(3,4)

9-18 ±15 ±1000 2874 87 ±675

RP30-2412DE

(3,4)

18-36 ±12 ±1250 1420 88 ±1020

RP30-2415DE

(3,4)

18-36 ±15 ±1000 1420 88 ±675

RP30-4812DE

(3,4)

36-75 ±12 ±1250 710 88 ±1020

RP30-4815DE

(3,4)

36-75 ±15 ±1000 710 88 ±675

UL60950-1 Certiﬁed

Model Numbering

Ordering Examples

RP30-2405SE = 24V Input, 5V Output, Positive Logic CTRL pin.

RP30-4812DE-HC = 48V Input, ±12V Output, Positive Logic CTRL pin, Heat-sink ﬁtted

Input Voltage

Output Voltage

Single or Dual

RP30-__ __ _E/_ _

Package

(4)

Control Logic

(3)

Notes:

Note3: no sufﬁx for CTRL function with Positive Logic (1=ON, 0=OFF)

Note4: add sufﬁx -HC for premounted Heat-sink and clips

Notes:

Note1: Maximum value at nominal input voltage and full load of standard type.

Note2: Test by minimum Vin and constant resistor load.

Summary of content (8 pages)

PAGE 1
Features Regulated Converters • • • • • • 2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The RP30-E series DC/DC converters are certified to UL 60950-1 and cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2” x 1.
PAGE 2
RP30-E DC/DC Converter Series Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted BASIC CHARACTERISTICS Parameter Input Voltage Range Under Voltage Lockout (UVLO) Condition Min. Typ. Max. nom. Vin= 12V nom. Vin= 24V nom. Vin= 48V 9VDC 18VDC 36VDC 12VDC 24VDC 48VDC 18VDC 36VDC 75VDC Vin = 12V DC-DC ON DC-DC OFF 8VDC 9VDC Vin = 24V DC-DC ON DC-DC OFF 16VDC Vin = 48V DC-DC ON DC-DC OFF 33VDC 17.
PAGE 3
RP30-E DC/DC Converter Series Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP30-2405SE Efficiency vs. Output Current Efficiency vs. Input Voltage 95 95 90 90 80 85 Efficiency [%] Efficiency [%] 85 75 70 65 60 55 18Vin 24Vin 36Vin 50 45 40 10 20 30 40 50 60 70 80 90 80 75 70 65 60 100 18 20 22 Output Current [%] 24 26 28 30 32 34 36 72 75 Input Voltage [VDC] RP30-4805SE Efficiency vs. Output Current Efficiency vs.
PAGE 4
RP30-E DC/DC Converter Series Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted External Output Trimming Output Voltage Trimming Single output Powerline converters offer the feature of trimming the output voltage over a certain range around the nominal value by using external trim resistors. No general equation can be given for calculating the trim resistors, but the following trimtables give typical values for chosing these trimming resistors.
PAGE 5
RP30-E DC/DC Converter Series Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted Dual Output Voltage Trim Tables RP30-xx12DE Trim up 1 2 3 4 5 6 7 8 9 10 Vout = 24.24 24.48 24.72 24.96 25.20 25.44 25.68 25.92 26.16 26.40 Volts RU = 218.21 98.10 58.07 38.05 26.04 18.03 12.32 8.03 4.69 2.02 kOhms Trim down % 1 2 3 4 5 6 7 8 9 10 Vout = 23.76 23.52 23.28 23.04 22.80 22.56 22.32 22.08 21.84 21.6 % Volts RD = 273.
PAGE 6
RP30-E DC/DC Converter Series Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted Derating Graph(11) RP30-483.3SE RP30-483.3SE with Heat-sink 80 80 Output Power [%] 100 Output Power [%] 100 60 40 20 0 -40 -20 0 20 40 60 70 80 60 40 20 0 -40 100 120 Ambient Temperature [°C] -20 0 20 40 60 80 76 100 120 Ambient Temperature [°C] Notes: Note10: BELLCORE TR-NWT-000332.
PAGE 7
RP30-E DC/DC Converter Series Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted C1 C2 C3/C4 RP30-12xxSE RP30-12xxDE 6.8μF/50V 1812 MLCC N/A 1000pF/2kV 1808 MLCC RP30-24xxSE RP30-24xxDE 6.8μF/50V 1812 MLCC Fuse N/A RP30-48xxSE RP30-48xxDE L1 Input 2.
PAGE 8
RP30-E DC/DC Converter Series Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted Dimension Drawing (mm) 50.8 5.60 10.2 40.6 Ø1.0 Recommended Footprint Details Ø1.3 +0.15/-0 5 5.10 10.20 12.70 17.80 2.54 2.54 45.70 Bottom View 1 6 Pin Connections 7 4 Pin # 10.20 17.80 15.24 2 8 Dimension Drawing (mm) with Heat-sink 50.