Datasheet

ENVIRONMENTAL
Parameter Condition
Value
Operating Temperature Range
without derating
with derating
-40°C to +78°C
-40°C to +100°C
Maximum Case Temperature +105°C
Temperature Coefficient ±0.02%/°C max.
Thermal Impedance natural convection 0.1m/s (20LFM)
without Heat-sink
with Heat-sink
18.2°C/W
15.8°C/W
Operating Humidity 5% - 95% RH
Thermal Shock according to MIL-STD-810F
Vibration according to MIL-STD-810F
MTBF according to MIL-HDBK-217F, G.B. +25°C 3308 x 10
3
hours
DC/DC Converter
Specifications (measured at Ta = 25°C, nominal input voltage, full load otherwise noted)
RP10-A
Series
PD-5
REV.: 3/2018www.recom-power.com
Derating Graph
(7)
-40 60 8078 100
40
200-20
0
20
40
60
80
100
Ambient Temperature [°C]
Output Power [%]
-40 60
81
80
10040
200-20
0
20
40
60
80
100
Ambient Temperature [°C]
Output Power [%]
RP10-2405SA
RP10-2405SA-HC
SAFETY AND CERTIFICATIONS
Certificate Type (Safety) Report / File Number Standard
Information Technology Equipment, General Requirements for Safety E196683
UL60950-1, 1st. Ed.: 2003
C22.2 No. 60950, 1st. Ed.: 2003
EMC Compliance Condition Standard / Criterion
Information technology equipment - Radio disturbance characteristics -
Limits and methods of measurement
(8)
without external filter
with external filter
EN55022, Class A
EN55022, Class B
ESD Electrostatic discharge immunity test Air ±8kV and Contact ±6kV
EN61000-4-2, Criteria A
Radiated, radio-frequency, electromagnetic field immunity test 10V/m EN61000-4-3, Criteria A
Fast Transient and Burst Immunity
(9)
±2kV EN61000-4-4, Criteria A
Surge Immunity
(9)
±1kV EN61000-4-5, Criteria A
Immunity to conducted disturbances, induced by radio-frequency fields 3Vr.m.s EN61000-4-6, Criteria A
Power Magnetic Field Immunity 100A/m continuous, 1000A/m 1 second EN61000-4-8, Criteria A
continued on next page
Notes:
Note8: See filter suggestions on next page. RP10-4805SA meets EMI Class B without external components
Note9: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Recom
suggests: Nippon chemi-con KY series, 220µF/100V
Notes:
Note7: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part number not shown here please
contact our technical support service at [e-mail]